robothut Posted June 16, 2022 Share Posted June 16, 2022 Link to comment Share on other sites More sharing options...
robothut Posted June 16, 2022 Author Share Posted June 16, 2022 Link to comment Share on other sites More sharing options...
robothut Posted June 18, 2022 Author Share Posted June 18, 2022 Link to comment Share on other sites More sharing options...
robothut Posted July 5, 2022 Author Share Posted July 5, 2022 Changed the body back so that 2 AAA batteries could be used for more speed. Also, this lets me run the LEDs from the 3-volt supply instead of the power poster circuit. The power booster circuit now just runs the DPDT relay for the auto forward reverse action. I also changed the toes on the feet to be shorted and tapered so if your build is a bit sloppy, they will not hang up. I also made the arm linkage lever 2mm longer to make sure it will not get knocked of the drive cam in ruff handling or shipping, but this meant I had to make a change to the top of the Leg/ foot part, so the longer arm linkage does not hang up on the leg. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now