Horikawa smoking Space Fighter wiring help needed

[6Stelab9]

I'm have a space fighter to work on. This is the  wiring diagram I think is good (Tell me if  there is an error) but I don't know where to connect the bulb to the +terminal so it can blink when the guns are in action.

Thank you for your help

[robothut]

Do you see the red fiber board on the back side of your picture. That is where the clicker for the guns is and that is where the gun light wire connects. By your drawing this is a positive ground toy, so the clicker spring will provide the positive voltage to the lights when the clicker cam hit the clicker spring.

[6Stelab9]

On 5/29/2021 at 11:45 PM, robothut said:

Do you see the red fiber board on the back side of your picture. That is where the clicker for the guns is and that is where the gun light wire connects. By your drawing this is a positive ground toy, so the clicker spring will provide the positive voltage to the lights when the clicker cam hit the clicker spring.

Thank you very much John. There is some solder remaining on the rivet that can be hardly seen, so I guess it is where the bulb connects. Now I just need to find a new bulb and to do clean solder (which is a kind of challenge for me ).