Joe K. Posted January 24, 2005 Share Posted January 24, 2005 What was the diameter of the salvaged gear from the Space Walk Man you used to repair the Space Explorer?Was it more than or less than one inch?See photo: Link to comment Share on other sites More sharing options...
bartzenegger Posted January 24, 2005 Share Posted January 24, 2005 hey joe, its a hair over 1 1/2 inches.if its for an explorer........ god help ya!! :huh: if i can help further just let me know.good luck Link to comment Share on other sites More sharing options...
Joe K. Posted January 24, 2005 Author Share Posted January 24, 2005 And you actually needed to use a gear with even a larger diameter so that more of the gear teeth could have been used, right?A gear (or gear segment) with a diameter of less than one inch would be too small. Correct? Link to comment Share on other sites More sharing options...
bartzenegger Posted January 24, 2005 Share Posted January 24, 2005 that gear works for only about 6-8 teeth on quad gear before it starts coming on line. this gear is to large for the gear married with the cam gear. - but can be used if you have just a couple of teeth that needed repaired. hope this helps joe. Link to comment Share on other sites More sharing options...
bartzenegger Posted January 25, 2005 Share Posted January 25, 2005 joe if you need pics i have many! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.