ROBODUDE Posted February 14, 2018 Share Posted February 14, 2018 Does anyone know if it is possible to safely get a glued robots body pieces apart ? Any suggestions would be appreciated--Thanks !!! Link to comment Share on other sites More sharing options...
Brian.. Posted February 14, 2018 Share Posted February 14, 2018 I fear that sometimes the only way inside is with a very sharp knife and a steady hand. Don't pull bits apart - plastic never breaks smoothly along seams. Solvents do more harm than good. Cutting has to be the last resort so try everything else first. If you decide to use superglue to reassemble them NEVER use that cheap thin crap from the dollar/pound stores. Use good grade, high viscosity (thick) glue. It won't leave that white residue behind. Good luck. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.