chilli Posted January 19, 2015 Share Posted January 19, 2015 Thanks John, good tip Link to comment Share on other sites More sharing options...
MetalRobotHead Posted January 19, 2015 Share Posted January 19, 2015 Which wire diameter did you buy Ian, was it 0.63. 0.8 or 1.0 mm, I am thinking which would give the most lift off, that is after I have fitted the new repro rocket posts I have just ordered from Classic Tin Toy company, my Rocket man is receiving far too much attention, better be worth it, I am sure it will be, oh to see my Rocket Man launch a rocket and with its newly revolving antenna fixed at last. Link to comment Share on other sites More sharing options...
chilli Posted January 19, 2015 Share Posted January 19, 2015 Just to mention I got my unsprung rockets from http://www.redvenomrepros.com/ Excellent service, help and price. As i remember the 2 rockets were about $30 for the pair. You can buy sprung rocket from Randy's I think but they are about $130 (please correct this if I am wrong on the price) Link to comment Share on other sites More sharing options...
funkrobotik Posted January 19, 2015 Author Share Posted January 19, 2015 It was the 0.8 I ordered because the bits that came with the rockets that someone had just stuck in seemed a bit heavy but 0.8 or 1mm would do really Dave. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.